The Biggest...
The Baddest...
The Hottest Truckmount...Ever!

With a 61 horsepower GM Vortec™ 1.6 liter, fuel-injected engine, and Tuthill’s™ tri-lobe blower, the Titan 875 has the POWER to run three wands simultaneously with three cleaning speeds. How’s that for productivity!

The Titan’s exclusive heat exchanger system produces cleaning temperatures up to 270 degrees Fahrenheit and the ADC™ temperature control keeps that heat consistent and immediate.

With 3,000 psi standard, the Titan has the capacity for carpet, hard surface, and pressure washer cleaning applications.

The extreme performance truckmount that will do anything, do it better, and yet be reliable and easy to maintain.

Powered by a 61 horsepower GM Vortec® 1.6 liter, fuel injected engine and a Tuthill™ 5009 tri-lobe blower, the Titan lets you operate three cleaning speeds and run three wands simultaneously. You also have the flexibility of selecting the heat and vacuum you want, depending on the size of the job.

The Titan 875 is perfect for large commercial and residential jobs, water damage restoration, pressure washing and multi-wand applications. The Titan is equipped with two 2” hose connections for dual wand use. At an additional cost, a 2.5” Adapter Kit is available to use the third wand option and a Pressure Washing Tool Kit is available to use the pressure washing option.

For maximum cleaning power, use three wands or a rotary machine like HydraMaster's RX-20 or RDM. For high heat and reduced vacuum, choose the dual wand with short hose runs or a single wand at longer hose runs. To use a single wand with short hose runs, set the Titan to reduced heat and full vacuum. And for smaller jobs, or upholstery cleaning, you have the option of selecting low heat and reduced vacuum, as the Titan has a positive vacuum relief valve located on the recovery tank for precise vacuum control.

Top Selling Points

• 3,000 PSI standard
• Triple wand capable
• High, consistent working temperatures
• Keyless ignition
  

The Titan's efficient tube and fin heat exchanger captures the highest percentage of available heat from engine coolant, engine exhaust and blower exhaust to give you temperatures up to 270°F, with an open flow design to maintain minimal back pressure. The unique ADC™ temperature control system ensures that the cleaning solution is consistent within 2° F for streak-free cleaning.

In addition to superior performance, reliability and flexibility, the Titan also earns "thumbs up" for its serviceability. Keeping the needs of owner/operators in mind has been the highest priority for HydraMaster, giving you better performance by design. With the Titan’s front panel in three sections, instead of one big, hard-to-handle console, routine maintenance can now be "routine."

Specifications

GM Vortec Engine

• 61 HP, GM Vortec, 4 Cylinder
• Fuel Injected
• Three Speed Operation
• Cast Iron Block
• Fully Liquid Cooled

Competitor™ Plus Blower

• 5009 Tri-Lobe Vacuum Blower
• 760-800 CFM
• HydraMaster Exclusive Design
• Low Vibration-Pulsation and Sound Reduction
• Oil Bath Lubrication, No Grease Fittings
• Oil Level Sight Windows
• 2 Year Warranty

Multi-Stage Heat Exchanger

• High Efficiency Tube and Fin, open flow design to maintain minimal back pressure
• Advanced Heat Exchanger System
• 270°F Maximum Temperature
• 250°F Operating Temperature
• ADC Temperature Control

High Pressure Pump

• High Pressure Pump
• 3,000 PSI Unheated Pressure
• 5.5 GPM Volume
• 1,200 Heated Pressure

Standard Equipment

• Machine Power Console
• 100 Gallon MaxAir™ Recovery Tank
• Stainless Steel HydraHose
• 5 Gallon Chemical Jug
• 150 ft. 2” Vacuum Hose
• 10 ft. 1-1/2” Wand Whip Line
• 150 ft. High-Pressure Solution Hose
• 50 ft. Water Supply Line
• Battery Box
• Van Decal
• Van Installation Kit
• Owner's Guide and Maintenance Log
• Embroidered HydraMaster Jacket